Athena’s Series IMP Modules use microprocessorbased circuitry to perform all required control functions. Units have built-in diagnostics and are fully self-tuning– setpoint temperatures are maintained without the need to manually preset or adjust the control temperature.
• Simultaneous digital setpoint and digital temperature indication
• Available in 15-amp modules as well as single-zone 15- and 30-amp portable temperature controllers
• Athena’s Controllers are compatible with all D-M-E Company’s G SERIES and SMART SERIES® ITC, MCS, YUDO® and INCOE® brand mainframes.
• CompuStep® feature removes moisture from the heater before full power is applied
• CompuCycle® feature improves response time, reduces thermal fatigue and prolongs heater life by applying AC power smoothly and continuously
• Manual control for non-thermocouple applications, provides standby or “weekend” heat or to manually control temperature if a thermocouple fails
• Diagnostic and protection features include power “on,” power to load, manual made, and over/under temperature, plus indicators and system protection for reversed and open thermocouples
• SafeChangeTM “hot swap” feature allows safe removal and replacement of module

Call For Discount Pricing!!!

The Athena Series RMA is a microprocessor-based, single-zone temperature controller specifically designed for runnerless molding applications. It features an easy-to-use operator keypad, two LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual, and closed loop mode.
• Compatible with industry standards control modules and mainframes
• Accepts Type J thermocouple
• Bumpless auto/manual transfer
• CompuStep® bake out feature prevents moisture at startup
• Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple
• Open thermocouple break protection with jumperselectable shutdown or average power output based on operation
• Preset alarms at 30°F (17°C)
• SafeChange™ “hot swap” feature allows safe removal and replacement of module
• CE compliant

Call For Discount Pricing!!!





.

The Athena Series RMB is a microprocessor-based, single-zone temperature controller specifically designed for runnerless molding applications. It features an easy-to-use operator keypad, two LED displays, and three discrete indicators for heat-current, alarm and manual mode. Athena’s mainframes are compatible with all D-M-E Company’s G SERIES and SMART SERIES,® ITC, MCS, YUDO® and INCOE® brand mainframes.
• Accepts Type J or Type K thermocouple input (jumper selectable)
• Auto-tuning, with adjustable proportional band and rate
• Bumpless auto/manual transfer
• CompuStep® bake out feature prevents moisture at startup
• Built-in loop break, short, open, and reverse thermocouple protection
• Built-in triac safety protection
• Ground-fault protection
• Preset alarms at 30° F (17°C)
• Jumper-selectable soft-start mode
• Current monitor feature displays average current to load
• SafeChangeTM “hot swap” feature allows safe removal and replacement of module
• CE compliant
.Call For Discount Pricing!!!

The Athena Series RMC brings new and highly productive benefits to injection molders looking for a modular hot runner controller that’s flexible, easy to set up, and simple to operate. Using the popular Modbus® communications protocol, the Series RMC gives users the ability to set or change all zones, either remotely from a desktop computer, or (with the ALL command) from any other individual RMC module in the mainframe.
• Choice of three default modes for open thermocouple condition
• Built-in triac safety protection
• Accepts J or K thermocouple input
(jumper selectable) • SafeChangeTM “hot swap” feature allows safe removal and replacement of module
• CompuStep® bake out feature prevents moisture at startup
• Built-in loop break, short, open, and reverse thermocouple protection
• Boost” mode for temporary % of power output increase
• Ground-fault protection
• Adjustable setpoint limits
• Stores highest temperature detected
• Current monitor feature displays average current to load
• CE compliant
Call For Discount Pricing!!!
.

The Athena Series RMT is a microprocessor-based, dual-zone temperature controller specifically designed for runnerless molding applications effectively doubling the zone count per module without doubling the price. It features two easy-to-use operator keypads, four LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual and closed loop mode.
• Accepts Type J thermocouple
• Bumpless auto/manual transfer
• CompuStep® bake out feature prevents moisture at startup
• Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple
• Open thermocouple break protection with jumperselectable shutdown or average power output based on operation
• Preset alarms at 30°F (17°C)
• SafeChange™ “hot swap” feature allows safe removal and replacement of module
• CE compliant
• 15 amps per zone
Call For Discount Pricing!!!
.

• Thermocouple Connectors
• Mold Power/Input Connectors
• Combo Connectors for Tri-ZoneTM System

Call For Discount Pricing!!!
















.

Athena Portable MFL Mainframes offer the flexibility of 1 to 3 zones of control at 15 amps per Zone. The MFH Mainframes offer Zone control up to 30 amps. The portable mainframes support the following Athena control modules: IMP, RMA, RMB and RMC.

5 zone plus mainframes also available. Call For Pricing.


Call For Discount Pricing!!!








.

Athena’s dual-voltage hot runner control system combines 240 Vac and 24 Vac into one mainframe cabinet, eliminating the need to maintain two separate systems. This configuration is typically used in applications where the heaters for the manifolds operate on 240 Vac power and the injection nozzles operate on 24 Vac power. The control system includes the mainframe cabinet with a fused circuit breaker/ disconnect switch, stepdown transformer, floor stand and a special safety interlock which prevents the insertion of 24 Vac control modules into a 240 Vac slot in the mainframe.
• The Series RMB or RMC control modules are available for use in the dual voltage mainframes
• Communications available with RMC control modules
• CE approval
• Wide range of accessories available for customizaton of control system

Call For Discount Pricing!!!


.

Athena’s new Flexible Mold Power and
Thermocouple Cables are available for 5-12 zones in lengths from 10-20´, and are produced through an extrusion/corrugation process that produces a seamless, corrugated nylon tube.
• Features 100% Stranded Wire for Maximum Flexibility and Durability
• Has Connections that are Fully Tested for Wiring Integrity
• Special Transition and “Y” Cables are also Available

Call For Discount Pricing!!!